Automatic Egg Incubator with Humidity Monitoring for Chicken, Duck, Goose and Quail Eggs

The incubator is equipped with an automatic water addition device. Users should connect one end of the water pipe to the small hole at the bottom of the incubator and the other end to the plastic base. Then, the plastic base should be placed on the opening of the water bottle (not included), and the water bottle should be inverted. Users should check if there is water in the water bottle once a day.

The incubator turns the eggs automatically every 90 minutes to avoid the adhesion between the embryo and the eggshell, and to ensure that the eggs are heated more evenly, which can effectively improve the hatching rate. The rollers turn slowly, and users should mark the rollers and the eggs to verify that the incubator is turning the eggs automatically.

The incubator is equipped with an egg candler, which can be used to select fertilized eggs and observe the development of embryos. Using an egg candler in a dark environment will provide clearer observation.

The incubator has five incubation modes: constant temperature incubation mode and four automatic incubation modes (chicken, duck, goose, and pigeon). In constant temperature mode, users need to manually adjust the temperature, as the incubator will not automatically change the temperature over time. In the four automatic incubation modes, users cannot manually adjust the temperature, as the incubator will automatically adjust the temperature according to the required hatching temperature at different times.

Three days before the chicks are about to break their shells, users should remove the rollers and place the eggs in two trays. Then, they should spray warm water on the surface of the eggs 6-8 times a day.

The spacing of the rollers is adjustable, allowing the incubator to be used for chicken eggs, duck eggs, goose eggs, pigeon eggs, and quail eggs. Users should incubate different types of eggs in batches.

When the ambient temperature is low or the incubator temperature is difficult to rise to the set temperature or the temperature fluctuates slightly, users should put the incubator into the foam box.

product information: